For 15 mm Monolithic Tempered Glass Thickness Range 14.5 to 15.5 mm (.570" to .610")

Typically Used as the Base Channel for Glass Railing Systems

Drilled and Counter Bored 11-13/16" (300 mm) Center-to-Center, or We Will Custom Drill to Your Specifications
Custom Cutting and Mitering Service Available

The CRL B6S Series Heavy-Duty Square Base Shoe is used as the base channel for glass railing systems. It can be clad in six choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered and tested a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.

CRL Mill Aluminum 3m B6S Series Standard Square Base Shoe Drilled with 9/16" Hole Pattern "D" for 15 mm Tempered Glass

Other Products/Finishes:

CATALOGUE NUMBER	DESCRIPTION
B6S10D	CRL Mill Aluminum 3m B6S Series Standard Square Base Shoe Drilled with 9/16" Hole Pattern "D" for 15 mm Tempered Glass
B6S10D6	CRL Mill Aluminum 3m B6S Series Standard Square Base Shoe Drilled with 9/16" Hole Pattern "D" for 15 mm Tempered Glass
B6S10F	CRL Mill Aluminum 3m B6S Series Standard Square Base Shoe Drilled with 9/16" Fascia Pattern 'F' for 15 mm Tempered Glass

More Details:

Catalogue Number:

B6S10D

Also Available in These Catalogues:

CRL63R Architectural Balustrade Systems, PAGE 138R

HR18 Architectural Balustrade Systems 2018, PAGE 155B

CRL53R Glass & Glazing Catalogue, PAGE 569G

CRL63A Architectural Hardware Master, PAGE 595H

CRL93A Architectural Railings, PAGE HR028

LP11 Commercial Door Handles Catalogue, PAGE L238

Stock Length:

118-1/8" (3 m)

Hole Size:

9/16" (14.3 mm)

Counter Bore x Depth
Holes Drilled C.T.C. :

7/8" (22 mm) x 1/2" (12.7 mm)
11-13/15" C.T.C.

Ship Via:

No UPS - Common Carrier Only

Shipping Weight:

86 lb (39.01kg)

Minimum Order:

1 Each

Additional Product Information:

GLASS SPECIFICATONS:
3/4" (19 mm) Thick Glass when using TAPER-LOC™ Dry Glaze System or Wet Glaze System.

Important Notes:

CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

For 15 mm Monolithic Tempered Glass Thickness Range 14.5 to 15.5 mm (.570" to .610")

Typically Used as the Base Channel for Glass Railing Systems

Drilled and Counter Bored 11-13/16" (300 mm) Center-to-Center, or We Will Custom Drill to Your Specifications Custom Cutting and Mitering Service Available

Drilled and Counter Bored 11-13/16" (300 mm) Center-to-Center, or We Will Custom Drill to Your Specifications
Custom Cutting and Mitering Service Available