RS0B25BS - CRL Brushed Stainless Steel Dome 2-3/8" Glass Rail Standoff Fitting with Mounting Plate
C.R.LaurenceC.R. Laurence of Australia Pty Ltd.
Connecting the World to Everything Glass
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF



Catalogue Number: RS0B25BS
Finish: BRUSHED STAINLESS


  • For Use with 1/2" and 3/4" (12 and 19 mm) Monolithic Tempered Glass or 9/16" and 27/32" (13.52 and 21.52 mm) Laminated Tempered Glass Using Kuraray SentryGlas® Interlayer

  • High Grade Alloy 316 Stainless Steel Standard

  • Designed to Mount to Wood, Concrete or Steel
  • Custom Sizes and Finishes Available

  • This CRL Point Supported Standoff Fitting has a 4" x 9-1/4" (102 x 235 mm) back plate giving the installer more adjustment, and four anchor points during installation for those tricky job site mounting conditions. The steel back plate can be fastened directly to steel, concrete, or wood substrates and includes a cover plate. This versatile Standoff Fitting features a 2-3/8" (60 mm) diameter domed cap with a 3/8"-16 threaded stainless steel rod to secure the glass panel.



    CRL Brushed Stainless Steel Dome 2-3/8" Glass Rail Standoff Fitting with Mounting Plate


     


    Other Products/Finishes:

    Catalogue Number:RS0B25BS
    Also Available in These Catalogues:
    CRL63R Architectural Balustrade Systems, PAGE 249R
    HR18 Architectural Balustrade Systems 2018, PAGE 270B
    SC18 Standoff and Clamp Hardware, PAGE 35SC
    CRL63A Architectural Hardware Master, PAGE 649H
    CRL93A Architectural Railings, PAGE HR089
    Colour:Brushed Stainless
    Ship Via:Can Ship UPS
    Minimum Order:1 Each

    The 2-3/8" (60 mm) diameter Standoffs are mechanically fastened to a 3/8" (10 mm) thick Alloy 316 grade stainless steel back plate that is pre-drilled for mounting. Two popular stainless steel finishes are available from stock. If your customer has a special job site condition, custom diameters and lengths are also available. Attachment anchors for wood, concrete or steel are sold separately.

    SPECIFICATIONS:
    For use with 1/2" or 3/4" (12 or 19 mm) Monolithic Tempered Glass. Also for use with 9/16" or 27/32" (13.52 or 21.52 mm) Laminated Tempered Glass using Kuraray SentryGlas® Interlayer. Do not use with raw or annealed glass.

    GLASS FABRICATION: Two 3/4" (19 mm) Diameter Holes Per Fitting.

    Spacing: Maximum spacing between fittings depends on use and mounting conditions; Minimum hole spacing between standoffs is 4" (102 mm). See our engineering report at http://www.crlaurence.com/datasheets/testreports/docs/Standoff_Railing_Sys_Rep_032713.pdf

    For use with 1/2" or 3/4" (12 or 19 mm) tempered glass. Do not use with raw or annealed glass. NOTE: Maximum bracket spacing is 24" (610 mm) on center with 48" (1.22 m) maximum glass panel widths.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.